Setting the Sigineer Power Inverter Charger to “Power Saver On” mode and #3 DIP to position “0” will activate the “Unit Off Charging”. “Unit Off Charging” will enable the inverter charger to charge batteries as much as possible while without discharging them. In “Unit Off Charging” mode, the inverter will stay in standby mode without […]
With our Battery Temperature Sensor, you can apply the proper charge voltage for achieving optimum battery performance and longevity. The ideal charge voltage required by batteries changes with battery temperature. The battery temperature sensor allows the charge controller to continuously adjust charge voltage based on actual battery temperature. Temperature compensation of charge voltage assures that […]
Siginner Power inverter chargers allows the capability of setting different Low Battery Alarm & Cutoff Voltages according to your specific applications. Deep discharge of the lead acid battery and many others leads to high losses in capacity and early aging. Thus discharging a battery properly according to its characteristics is getting more and more important. In […]
The Power Saver Mode is a great feature for transformer based Inverter Charger which usually draws a high current from batteries when left idle. There are two different working statuses for Sigineer Power’s inverter chargers: “Power On” and “Power Off”. When power switch is in “Unit Off” position, the inverter is powered off. When power […]
Auto Generator Start (AGS) For PSW7, APC, HP inverters. The Auto Gen Start is a great option to have when your power system have a generator as backup. All Sigineer Power inverter chargers are equipped with the capability to automatically start a generator when battery voltage goes low to alarm and turn the generator off when […]