Description

Features:

100 Amp Capability
Woks in 60V to 290Vac power systems
Status indication
Remote on/off control by a relay
1-year product warranty

Model #:CB240V100A/2P
<strong>Electrical Specs:</strong>
Rated voltage: 120/230Vac.
Voltage range: 60V-290Vac
Rated current: 100A
Surge current: 200A (1 min)
Breaking capacity: Ics 6000A
Lifespan：Mechanical 20000 times; Electrical 4000 times
Terminal size: accept up to 35mm2 cables
Installation on 3.5*7.5mm standard rail
Operation temp: -5°C to +40°C (23 to 113°F)
Altitude: below 2000m

This Remote Control Circuit Breaker works in 60V-290Vac 50/60Hz power systems. It works in virtually all power systems.
It works with Sigineer 120V or 240Vac inverter chargers.
It features overload, short circuit protection and remote on/off control via cables.
The two black and red cables allow the breaker to be opened when they are separated and closed when they get into contact.

The two cables accept control signal from Sigineer Power’s DC Detector, inverter dry contact or other third party devices. The breaker will cut off AC input to the inverter when battery is fully charged and accept AC input again when the battery voltage drops to preset level.

The two cables can also be controlled by external devices such as lithium battery BMS.
Note: The two remote control cables don’t carry any voltage, don’t input any power, or damage will occur.
Operation Indication:
Constant green: breaker closed.  / Flash green: breaker open.

Wiring Instruction:
For 120/230Vac single phase system, pls wire the hotline to “L” and the Neutral to “N”.
For 120/240Vac split phase system, pls wire the hotline1 to “L” and the hotline2 to “N”.
Contact us at [email protected] if you have further questions.

Manual